Alkorcell

An Alkorcell door is similar to one made with polymers: it consists of a decorative sheeting based on polypropylene (PP) without halogen, plasticizers and formaldehyde. A thermosetting paint gives the sheeting the strength necessary for use in the furniture industry. From a technical point of view, Alkorcell laminate is a continuous plastic coating that is highly performing in many different ways. Non-toxic, uncontaminated with components harmful to health and environmentally friendly, it is also impermeable: in fact, Alkorcell products resist moisture, mould and micro-organisms.

Where to find them

• Doors
• Shelvess

Technical data

An Alkorcell door is similar to one made with polymers: it consists of a decorative sheeting based on polypropylene (PP) without halogen, plasticizers and formaldehyde. A thermosetting paint gives the sheeting the strength necessary for use in the furniture industry. For processes with different gluing systems, the sheeting is reinforced on the back with a primer and the gluing is done with dispersion or hot melt or solvent glues. From a technical point of view, Alkorcell laminate is a continuous plastic coating that is highly performing in many different ways. Non-toxic, uncontaminated with components harmful to health and environmentally friendly, it is also impermeable: in fact, Alkorcell products resist moisture, mould and micro-organisms. For all these reasons, it is a safe material, suitable for contact with food products: odourless and tasteless, it guarantees hygiene and ease of use in the kitchen. When burned it does not produce toxic or corrosive gases: it has a combustion completely similar to that of wood with a production of light-coloured fumes. Therefore it is particularly safe in eliminating processing residues. An Alkorcell door can be smooth or with a frame, solid coloured or with the appearance of wood. In the wood version, the textured finish is both pleasant to the touch and has an important aesthetic impact that makes Alkorcell a safe and stylish choice.

Maintenance

For cleaning this type of cabinet door, it is advisable to use only a soft cloth, such as a slightly damp microfiber cloth, adding, in the event of stains and grease, a neutral detergent free of solvents or aggressive substances. Dry immediately with a soft, dry cloth, especially along the joints of the door. In the case of more resistant dirt, it is possible to use a microfiber cloth with detergents specifically designed for plastic and/or laminated surfaces. Excessive rubbing and the use of rough sponges, steel wool pads, abrasive creams, or powder cleaning products should be avoided, as they could damage the material’s protective film, creating worn areas and discoloration. In the presence of limescale stains, simply use detergents containing acetic acid (10–15% formulation), citric acid, or, for lighter stains, lukewarm water and bicarbonate of soda (more aggressive descaling products, such as sanitary-type ones, are prohibited). Do not use alcohol, acetone, chlorine-containing detergents, bleach, or ammonia. Cleaning with steam jets is absolutely forbidden, as the plastic materials could deform. Pay particular attention to the care of the edging, which must be protected during use and maintenance from excessive heat, water, and humidity.